Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having an issue were my 4948 switches are not sending the vlan index OID 1.3.6.1.2.1.17.7.1.4.2.1.2. Has anyone run into this and if so how can I fix it?
Hello everyone, Here is my issue. We have a Nexus 7010 and for the third time now slot 3 will not allow a module to run in it. This is what we have done so far. RMA'd the module and the chassis. When the module is put into another slot it comes up w...
This is setup on two Cisco 3900 series routers. When I try to ping from a laptop I get the error:%CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /10.1.11.2, src_addr= 172.2.1.2, prot= 1On routerA. Any help would b...
After taking a look at the current IOS on the switch I do not see VSS mentioned in the release notes. You may need to move up to a newer IOS version to solve this issue. The very next IOS 3.4.4SG seems to support VSS. http://software.cisco.com/downl...
Is this the procedure you used on the router? Updated procedure:C2950T-24#conf tEnter configuration commands, one per line. End with CNTL/Z.C2950T-24(config)#aaa new-modelC2950T-24(config)#username myuser password 0 mypassC2950T-24(config)#line vty 0...