Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,does somebody know what's missing after Telemetry activation to see the Appliaction metrics. eg. RTP ?I just see the bandwidth consumed for RTP but no metrics e.g. DSCP values were processed from Netfow data. Best regrads,Michael
Hello,the ISR 4331 supports MACsec MKA with the 2-port Gigabit Ethernet WAN Network Interface Module (NIM-2GE-CU-SFP). My question is, do I still need the Security (SL-4330-SEC-K9) and (FL-4330-HSEC-K9) and Performance (FL-4330-PERF-K9) licenses or i...
Hello,
I have a simple question regarding multi-auth host-mode.
Multiauthentication mode allows one client on the voice VLAN and multiple authenticated clients on the data VLAN. I'm searching about the limit of how many endpoints can be authenticated...
Can anybody explain me why the ASR is ignoring the soo community in my route-map export-400 config?
vrf definition 400 rd 172.16.224.7:400 ! address-family ipv4 import map import-400 export map export-400 exit-address-family
ip extcommunity-list sta...
Hello,
I read that the ASA stillt doesn't support 4096 RSA keys for SSL VPN. Is this limitation also if ASA the RootCA uses a 4096 RSA Key and the Issuing CA uses 2048 RSA Key?
Thanks
Ekahau 10.4.1 with DNAC 2.2.3.4 works for me.Make sure that the building name matches with DNAC building name. Also, import should be made on site level and not building level (not supported)Further make sure to remove the longitude and latitude vaul...
Thanks Will,indeed this ia a C9300L. I was assuming that DNA-C makes no difference, as the netflow data contains the IP dscp values.That points to the question, is a C9500-48Y4C acting as border device a qualified router or still just a switch.Thanks...
Bug still open... but found a working solution for me.
Adding in CLITemplateDbVariablesQuery.properties
Variable for Access Ports (access vlan or access vlan + voice vlan)
AccessInt=select vlan.name from VLANSwitchportSettings vlan where (vlan.operat...
Hi Nagendra,
thank you for reply.
Maybe you get me wrong. I have PE1 and PE2 connected to the same customer site CE1. I want to mark all prefixes received from CE1 on PE1 with a SoO attribute (export) and filter this SoO on PE2 (import) to CE1. This ...
