Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configured a CME as a conference bridge and with 3rd Party SIP phones.My problem is when any of the SIP phones dials in to a conference the display name only say "Conference" on the SIP Phone and not the actual name of the conference. SIP c...
Hi,I'm designing a mid-size network for about 100 users on two high latency links (Cell/SAT). First I looked at having a ISR 4221 router with a ASA 5545-X Firewall to let the router handle the routing etc. and the firewall to do the DPI, AVC, IPS etc...
Hi Guys,
I want to make a small mesh network with a vWLC. I know that some AP's have only 1x 2.4 GHz and 1x 5GHz antenna, so if you use I.E the 5GHz frequency band as back haul you cant use it for distributing WLANS
Which AP's could you recommend...
Hi, i have a vWLC 8.2.130.0 with 1x 3602E AP and 1x 1142I AP in a bridge setup.
The 3602 is configured as flex + bridge and as a root AP.
The 1142 is configured as flex + bridge and as mesh a mesh AP.
im trunking 2 vlans across the bridge, vlans is...
Hi, i have 2 WLC 1 old and one new version.
I want to create a ethernet bridge between these 2 systems. is that possible?
My old WLC is a 2112 and the new one is a vWLC 8.2.130.
The reason is that i have a small site with a lot of 1131 AP (these APs...
Hi,Just to add some debug info. After the SIP phone enters the conference, the conference reply with UPDATEand Remote-Party-ID: "Conference" <sip:192.168.6.11>;party=called;screen=no;privacy=offas the new ID.. How can I remove, block or deny the upda...
Hi, its for between 5-10 Laptops, so not a big network. On the vWLC its called Flexconnect + bridge I think. would the 3600/3700 AP support clients in wlans on the back haul band?
Thanks,
Petter
