Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have VWic-1MFT-T1 installed in WIC 0 slot as well as AIM-voice-30 installed on the motherboard of 2611XM router. What is the config for AIM to work so the T1 can start using those DSP resources. Also the network-clock-participate wic0 is the referr...
I have a core 6509 with msfc doing layer 3 routing. and access 6509 switch with pfc and that has ip phones plugged into it. the phone send dscp ef. Can the access layer trust dscp and send it through the network because it has pfc.
I have a core 6509 with msfc doing layer 3 routing. and access 6509 switch with pfc and that has plugged into it. the phone send dscp ef. Can the access layer trust dscp and send it through the network because it has pfc.
I have three 1200AP using 802.11b within the hallway. There is no eap or peap being used. Only static wep keys will be used between client and the ap's. All the three ap's will be on different channels 1,6,11. So if user has a wireless phone and wal...
Thanks for the response. I'm not able to see the second command with aim 0. Only option i have is wic or slot#. I'm running 12.2.15zj3 code. Please let me know what i'm missing.
Thanks for the reply michael. yes they are in the same subnet and the calls will not get disconnected. What difference does that makes. Isn't their still reassociation that needs to happen on the wireless side.
