Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just curious if anyone has done this. I have the way I think it needs to be configured. Curious if someone has a different idea.
I currently have a guest network setup which sends an email approval to a sponsor. They click the approve link in the ...
I have just finished setting up an MRA cluster C/E servers running 12.5. I just tested a login from an out-of-the-box 7841 IP phone. It auto registered and I was able to self provision the phone and make some test calls. No issues. Works great. T...
I have a policy set in ISE for my wired MAB devices. I then have various AuthZ rules matchine my profiles. If the device doesn't match any of these, we hit the default AuthZ profile which has a result on it to put these devices in an internet only ...
I am trying to upgrade a CM server to latest 12.5 and it fails. Upon viewing the install logs i believe this below is the cause of my failure... Internal Error, File:ipm.c:2011, Function: ipmReadNormalizedInputLine(), "rpm --percent -iv --replacefil...
When implementing inline tagging on Cisco 3850/4500/9300/9400 switches - adding the propagate sgt command to the uplink interface - I know I have heard this but having an issue finding the documentation - but don't i need to increase the MTU on the s...
Thanks for the response. I have the dynamic VLAN working. If I device running DHCP gets a dynamic vlan assignment - it works. What I'm asking about is what if a device has a static IP, but is supposed to have a dynamic VLAN assignment. I know th...
I'm running 2.4 patch 11 and i'm having this issue. (you mentioned p11 appears to be ok). I have a profile policy and specify coa=reauth (global settings = no coa) When I make my test profile and refresh context/visibility and verify my device gets...
Just out of curiosity - where did you end up on this? I'd like know exactly what you did to get this working...if you have the time to share :).
Thanks
Just to clarify - are you suggesting you like to have one policy set for wired access - then in that policy set have 2 authorization policies, for example, one for 802.1x and one for MAB.
Then for wireless have a separate policy set for each SSID?
...
Thanks for the help guys. So from a check-list style approach i'd be doing something like the following:
Build new VMs, same OS level
Ensure all content databases are same versions
Add them to the cluster / config copy
Shut down old physicals
re-ip ...
