I found a 3548 in a storeroom today. One problem, it won't boot. I hypertermed into the switch, no IOS in the flash. Here's what I've got:switch: dir flash:Directory of flash:/3 -rwx 94680 <date> c3500XL-diag-mz-120.5.2-XU4 drwx 6784 <...

We have a T-1 to our primary ISP at our main site through a PIX 516E. We have a couple of remote sites that are interconnected via frame relay, and use our main sites internet connection. We are setting up cable modems (UBR 900's) at our remote sit...

I used the VPN wizard on a 501to set up a test VPN group, and assigned a scope of 10 IP addys for the group. I fire up the Cisco VPN client, get authenticated, and get the first of the 10 available addresses. However, I get the wrong subnet mask. ...

I've enabled syslog reporting on a few of our Cat 6500, and pointed them to the CiscoWorks server. The only indication that I'm receiving any information is in the RME - Administration - Syslog Analysis - Syslog Collector Status. The collector show...

I'm trying to send SNMP Traps and Fault notices to another NMS (NetCool). I've set up the SNMP and Trap adapters with the IP address and port of the NMS. No dice. I can use the Mail notification, but not the Trap notification. Is there a way to m...