Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
Im testing a MPLS Pseudowire setup in which i would want the nearend attachment circuit to go down if the far end attachment circuit goes down. So far I've tested on a subinterface and when i shutdown the subinterface on the far end of the xconnec...
Hi,
Im somewhat confused with the SNMP Group and User settings.
For example you can create a SNMP group with a noauth setting and you can tie that group to a user that has authpriv settings
snmp-server group group-noauth v3 noauthsnmp-server user use...
Hi All,
Anyone that is familiar how NCS5501 calculates the CIR/PIR, BC and BE values. Im not sure how the values are being calculated here
Policy map is configured below and applied to a tengig interface
policy-map test-policerclass PCP-ALLpolice rat...
Hi All,
Device: cisco Nexus9000 C9348GC-FXP Chassis
NXOS Version: 9.3.7
We are seeing a behavior in our IGMP joins that not all of the groups are joining at the same time. Checking the IGMP debug, I'm getting these messages for the groups that d...
Hi, What does a bridge-group do in l2vpn in IOS-XR? Is there any difference with creating one bridge-group and defining multiple bridge domains under it VS. multiple bridge-groups with a single bridge domain in it. Example:l2vpn
bridge group g1
b...
We are monitoring the switch via SNMP and using this OID: CISCO-ENTITY-EXT-MIB::ceExtNVRAMUsedFrom the description on CISCO-ENTITY-EXT-MIB.my, the value that is being returned is the one on the bootflash://, so is the naming misleading on this one? ...
Thanks for that info Francesco.
I was just wondering how does 802.1x distinguish whether im making the request in the data domain vs. the voice domain?
regards,
Jon
"
The command authentication port-control auto isn't for fall authentication bypass. It basically starts authentication when the port guess from down to up.
You have the command authentication event fail actionauthorize vlan xx to assign a vlan if yo...
