Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The Enterprise Class Teleworker solution has been deployed using 831s as end points. The IOS code required is 12.3(8)T5.http://www.cisco.com/en/US/products/ps6660/products_white_paper0900aecd80267995.shtml
I agree that doing the background research will be helpful. A strong QoS architecture is key in a successful deployment, especially with all of the different switching platforms.The Enterprise QoS design guide should be a good starting place. You'l...
Since you're running relatively new code you can use the new feature implemented to workaround the issue.Under the 2600's interface connected to the 1600, put: 'no cdp log mismatch duplex'
The root port is the port closest to the root bridge. A designated port is a non-blocking port. The root bridge will have all designated ports.Here's a crude diagram to clarify: A (root bridge) / \ B---CThe ports...
You can use extended ping to do pattern testing across your loops.http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a008010059a.shtml
