Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The SNMP Support for Named Access Lists feature adds support for standard named access control lists (ACLs) to several Simple Network Management Protocol (SNMP) commands. I was not able to find this feature on the Sup720 platform in the feature navig...
My outlook clients use random high ports to connect to Exchange servers. when a host uses port 2234, the NAM tags these pakets as soulseek. This is a false positive and I woud like to know how to modify the nam so that it wont identify port 2234 as s...
Config-register is set to 0x2102.when I pull the PCMCIA out and reload the router, it come up in boot mode.This is really bad and I would prefer it boot into rommon> and loos all functinality. rather that have some features but not others.Is there a ...
Objective: To limit the traffic on Vlan8. We are seeing traces from K1 or T1 to 192.168.1.4 like this:1- 10.10.10.52- 10.10.20.13- 192.168.1.4then1- 10.10.10.42- 10.10.30.13- 192.168.1.4 or1- 10.10.10.52- 10.10.200.13- 192.168.1.4this causes the pac...
I was told that using BVI's on my router will cause a huge performance hit because the packets flowing through those interfaces are not CEF switched.could someone validate this claim or provide a link to support it?Thanks,T
Thanks Darren, The caviat to this is that an application can only belong to 1 application group. so I have to remove Soulseek from the peer-to-peer group and add it to email group.So now I supose that if I have a real Soulseek server on the network i...
1. create a route maproute-map whatever permit 10 match ip address 101 set ip next-hop verify-availability ip-of-next-hop 10 track 10 2. create an acces-list to create a match criteriaaccess-list 101 permit whatever to whaterver3.apply the policy to ...
Thanks, I thought that responses DID send the replys back on the interface that it receive the the packet on.I will provide some debug output on monday. unfortunately I changed the IP's in the drawing to protect the innocent.From a layer 2 perspectiv...
