About mikeh

mikeh · 05-25-2007

I know this is a bit general, but I could really use some ideas on what else to check.We have had a site-to-site VPN up and running for several months. As of last Monday, the tunnel will no longer come up when traffic is initiated from my side of th...

mikeh · 04-10-2007

We have been running this server for a while and while it seems to work well, we see this error in the Application Event Log:Event Type: ErrorEvent Source: CiscoUnity_DSADEvent Category: Warning Event ID: 1096Date: 4/10/2007Time: 10:06:15 AMUser: ...

mikeh · 02-26-2007

We have successfully created Translation Patterns based on the last 4 digits of the DID number. One of the DID numbers is 555-9126. For incoming calls, this works just fine.We just tried to dial out to 91262XXXXXXX in the 262 area code and the Tran...

mikeh · 02-12-2007

We are on Unity v4.0(5) and have two servers. One is licensed for Voicemail Only and the other is licensed for Unified Messaging. Unity Networking is configured and appears to be working, except...On our Unified Messaging Server, we have some users...

mikeh · 01-10-2007

We have a PIX501 in front of our Exchange Server running OWA. The site is a home office with one static IP address on the outside interface.We can RDP through the firewall to the server, and we can telnet to port 25 on the server.However, if we try ...

mikeh · 05-29-2007

MJ, thanks for your comments. This issue has been resolved.After spending 2 hours on the phone with TAC, who had remote access to both devices, they concluded that the configurations where correct but it just wasn't working. So, they suggested a re...

mikeh · 04-30-2007

Yes I did, but I had to call TAC. There was an entry in a SQL table referring to a domain controller, but the record was incomplete. He deleted the record and fixed that error.The connection to our actual servers and domain were working properly. ...

mikeh · 03-15-2007

Thanks Fred. That is alot of useful information that I will look into and consider carefully. Very helpful - thanks!

mikeh · 03-14-2007

Is there a process to move from DCD to AD? We have been installed for a few years with DCD and would prefer to move to AD.Thanks!

mikeh · 02-28-2007

We thought about that when we did our initial rollout, but decided against it. We are able to monitor 911 calls and our people have been surprisingly careful. Thanks for the suggestion!

Member Since	‎08-12-2003 05:02 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	57
Total Helpful Votes Received	5

User Statistics

User Activity

Looking for ideas - Site-to-Site VPN Won't Come Up

CiscoUnity_DSAD Error in Unity 4.0(5)

Need Help with Translation Pattern

Unity Networking VMO and Unified Messaging Issue

PIX 501 and OWA Config

Re: Looking for ideas - Site-to-Site VPN Won't Come Up

Re: CiscoUnity_DSAD Error in Unity 4.0(5)

Re: DC Directory versus Micrsoft AD

Re: DC Directory versus Micrsoft AD

Re: Need Help with Translation Pattern