Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a question regarding ASR 1000-HX series GRE performance - what is maximum bandwidth on let's say ASR 1001-HX router? Line rate? Did not find exact numbers in data sheets.
We are going to order FPR4120 and selected in CCW:
FIREPOWER HARDWARE
FPR4120-ASA-K9
Cisco Firepower 4120 ASA Appliance, 1U, 2 x NetMod Bays
Some articles and forums say that FPR box running ASA code have no difference compared to ASA5000 ser...
Hi all!
I am testing N9k in virtual environment:
NX-OSv9K is a demo version of the Nexus Operating System
Software
BIOS: version
NXOS: version 7.0(3)I5(2)
BIOS compile time:
NXOS image file is: bootflash:///nxos.7.0.3.I5.2.bin
NXOS co...
Hi all!
I am facing strange behavior with NTP client behind NAT. Using network scanners I saw that NTP client sitting behind NAT can be NTP amplifier. I used nmap and several other tools, results are the same:
d@d:~/Downloads$ sudo nmap -sU -pU:123...
Hi all!
We have router Cisco ASR 1001-x. Now we need additional 10Gbit/s interface (at least one) on this platform with SFP+ form-factor port. We have found variants with part numbers SPA-1X10GE-L-V2 and SPA-1X10GE-WL-V2, but both of then are XFP-bas...
They are awful and ugly mostly and those which are quite pretty are only in *.pptp (PowerPoint) format which are quite unusable in Visio. I found these ones https://github.com/ecceman/affinity which look really nice but they are in SVG format, so I d...
No, we do not need to "no vpc orphan-ports suspend" manually to bring up these ports, it will happen automatically after delay-restore timer has gone. Checked on n9k 7.x.
Okay, here it is:
sw#sh runBuilding configuration...
Current configuration : 1167 bytes!! Last configuration change at 19:35:37 +05 Wed Nov 22 2017!version 15.1no service padservice timestamps debug datetime msecservice timestamps log datetime msecno...
Hi, @Rajeshkumar Gatti!
Is there some news about "Hardware-capable local flow redirect" feature? Is it now implemented and if so, in which software version?
