Hi Everyone,
Good Day!
I have a problem regarding showing the mac add table on C2960X. Please see below result.
When you check the ports Gi1/0/47 all mac add is pass through on this port wherein this is the trunking port. I don't why it show on the...
Hello Everyone!
I have problem to my cisco switch. Please see below image to the error:
Only symbol appear while booting the cisco switch.
The led light of the syst of cisco switch are the one blinking....
Hi All, Good Day!I have problem regarding telnet the port through client going to server and server to client.I already set the port in our firewall but only 2 ports are can telnet the port 80 and port 443 but for port 12345 this the error occur "htt...
Hi everyone! I have problem regarding my connection. I have many PCs connected to particular vlan for example is Vlan 200. In that Vlan all pcs connected to that vlan are statically assigned. Suddenly random PCs connection become intermittent and pop...
Hi everyone,Good Day!I have problem with my network. i have many pc connected to a particular vlan, sample is vlan 100 and they are set in static IP's. But random pc are occured ip conflict and when you ping this "transmit failed. General failure". a...
Hi Bradley,
What port is 0001.296b.59a9 actually connected to and what device is it? The packet tracer picture looks correct, you see each mac learned on the access port on the access switch but the mac addresses are learned on the trunk of the dis...
Hi Bradley,
Sorry for the late response.
Please take look below the topology example.
For Switch 1- Distribution Switch
C2960X-2F3A-1#show mac address-table vlan 13 Mac Address Table-------------------------------------------
Vlan Mac Address T...
Hi Bradley,
If I understand correctly, Gi1/0/47 is a trunk port and you want to know why you are seeing the mac addresses learned there even though the devices are not directly connected to that port, is that correct?
-Yes, you are correct on thi...
