Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, For network access we used dot1x for authentication. Now we need to change all the dot1x access interfaces, but not the static access interfaces. Is in prime infrastructure 3.7 a configuration method where I can setup the next configuration IF...
Hello,We have a problem that ISE 2.4.0.357 has lost the Network Devices and it can not be read them and will hung on status Loading.(See picture). If I try to Add a device, I have an Error "Failed to create network device - system error!" Best Regard...
Hello,We have a third controller and we want to move some (300) accesspoints to that controller.But I cannot find in the controller software or in Prime infra (3.4) how to do quickly, without to click on each Accesspoint and move them to that control...
Hello,
We are made every Saturday a backup of the configuration with a kron script. We have (in this example) a 2 stack catalyst 3850 switch.
kron occurrence Backup at 10:12 Sat recurring policy-list Backup!kron policy-list Backup cli copy system...
We have the same problem with a 9500-40A. We used 17.6.3 %PLATFORM-3-ELEMENT_TMPFS_WARNING: Switch 1 R0/0: smand: 2/RP/0: TMPFS value 41% above warning level 40%So looks like updating the switch is not the solution (so far)
The ACL are as followed.access-list 99 permit X.X.1.0 0.0.0.255access-list 99 permit 192.168.1.0 0.0.0.255access-list 99 deny any log snmp-server community rw-name rw 99snmp-server community ro-name rw 99 line vty 0 4 | line vty 5 15 access-class...
I have the same problem: Device '10.10.X.X'. Authentication failed for request from '52.73.169.169'. The Management address of te switch is a private range 10.10.X.XThe address 52.73.169.169 is an external adres and was found 3622 times in de AbuseIP...
We have the problem too with a Catalyst 9300 access switch and a Catalyst 9500 distribution, with vrf.We testing with a catalyst 3850 and even these switch gives the error. The solution we found, and works: ip tftp blocksize 512 In an other situation...
In the last few months I let it some resting, but the problem is stil there.all Backups from a Stack are bigger then 64 KB, but on the TFTP Server I recieve 64KB.Maybe there is some new here who knows the problem. Best regards,
