Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm looking for some alternatives for a redundant deployment of the SESM application in a hotspot environment.Currently the only option I can imagine is some L4 load balancing box (placed in front of multiple SESMs with SSG redirecting the appropr...
Hi,since nowadays SSH is being deployed as one-and-only access method for IOS boxes in some installation, I'm somewhat struggling with the IOS ssh client:Is there a way to tell the ssh client in which VRF it should do a lookup for the ssh server?Some...
Hi,we want to use authorized ARP on an AZR in a PWLAN environment. This isn't an issue for DHCP clients since authorized arp for dhcp is around for a while.But we also support clients with static IPs (ip mobile arp + nat). I know there is a NAT accou...
Hi,I heard of plans to optimize LDP convergence issues when switching back to a previously failed link. The problem is that when the IGP converges faster than LDP (especially with throttle timers) MPLS (VPN) traffic is blackholed until LDP is up.- ta...
Is there a simple way of setting a default metric for all non-OSPF originated routes in an MPLS VPN when redistributing from MP-BGP to the VRF OSPF process ? The 'default-metric' command (configured in the VRF OSPF process) seems to be applied also w...
Hi Sanjeewa,thanks for the info - though I had the hope that this would happen somewhat sooner Can you make CSCsa62544 viewable for non-Cisco folks - at the moment no description is available ...thanksStefan
Hi,yes you cross-connect two ports on the same chassis in different vrfs. This is to ensure that traffic between the servers and clients hits the IOS slb.In the attached sample ports gig9/10 + gig9/11 are xconnected. Note that you have to manually ov...
Hi Max,the IOS SLB code on the C6k platform is not VRF aware at the moment (can only speak of c6k - never tried c7200). It is 'interface-aware' - which means that you can run IOS SLB on a VRF-lite box where the client and real-server facing interface...
Hi Sunil,the switchover back to the primary path is triggered by the TE reoptimization process. The default for periodic reoptimization is 3600s (== 1h) ...You can check if it's the reason for not switching back by manually triggering the process on ...
