Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Need help with this one. I can log on VPN using user/password. I have certs installed correctly. When I first make a selection for the Cert connection, it download the profile below. When I try to reconnect using the below profile, I get the error, "...
I have a Catalyst WS-C3650-48PS and WS-C3750G-48TS. What firmware do I need to download from the CISCO site to apply a software upgrade for each device?
I have a CISCO 3650 Switch with static IP address on VLAN7 - 207.32.40.45. I have a wireless access point configure using a private IP address of 192.168.71.148, 255.255.255.0. The wireless access point is connect on port 3. How do I get the static...
ASA version: 8.2(1), ASDM version: 6.2(1), Device Type ASA 5540I use the Wizard to create a clientless VPN. When I try to access VPN, it will not display a logon banner. I get page can not be displayed.webvpn enable OUTSIDE svc image disk0:/anyconnec...
I am not having any network issues. I can use anyconnect with no problem when I don't use my SSL Cert Group but instead use the IP address. Once I select the SSL cert group using FQDN and the ASA download the SSL profile, I get the error, Connection ...
Current configuration : 16227 bytes!! Last configuration change at 10:01:00 CST Wed Nov 28 2018! NVRAM config last updated at 08:56:11 CST Wed Nov 28 2018!version 15.2no service padservice tcp-keepalives-inservice timestamps debug uptimeservice times...
Current configuration : 16227 bytes!! Last configuration change at 10:01:00 CST Wed Nov 28 2018! NVRAM config last updated at 08:56:11 CST Wed Nov 28 2018!version 15.2no service padservice tcp-keepalives-inservice timestamps debug uptimeservice times...
