Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just got a new BE6K-S preloaded with 11.5 applications. In all previous BE6K-S systems, there's been a pre-configured setup already installed on the applications. All you really had to do was turn the VMs on, and with very little configuration work...
Trying to use the preconfigured images for the singlewire paging server. All of the documentation seems to refer to an initial unconfigured installation using admin/changeMe as the initial credentials. However that doesn't work with the pre-configu...
Can anyone help with how to configure the queues on the 8 port Gigabit modules? I've gone through Cisco's documentation and nothing seems to match up to how to change the queuing on the ports. There's docs for the older switch models, but nothing t...
Can the cisco phone anyconnect client be configured to work with a Meraki firewall or other SSL or IPSec based vpn concentrator? Or is it a proprietary version of SSL that only works on the ASA or on an IOS router?
We have an 8831 with UCM 9.1.2 and it appears that it can only dial digit by digit. I haven't tried creating a SIP dial rule KPML file for it yet, but it surprises me that it only dials digit by digit out of the box. Am I missing a configuration se...
I think you guys are talking two different things here. The OP is talking about the fact that on all the 7800 series phones, once the toast notice fades out, its almost impossible for a user to retrieve a call on hold or a call waiting. Its extreme...
If anyone else runs into this, the answer is both simple, yet not something you'd think of. If you're using the pre-configured images, when you configure the platform username and password on the CUCM, this gets populated over to the paging server. ...
Thank you for posting this! I've been looking for this info for a long time! I kept looking under the Line template! I had pretty much given up on using the quick add feature because I always had to go back into the device to make the settings work t...
The problem I'm having with this thread is that Cisco is treating this as if its a misconfiguration of DNS causing the issue. That is simply not true. Its a perfectly valid and common occurrence to have a server referred to by different names with ...
