Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys,I am planning to upgrade WLC from 7.2.103.0 to 7.2.110.0 due to some bug, but I wanted to know if it is compatible with WCS - 7.0.240.0 and NAC Guest server version 2.1.0, I am made some search but I couldn't get to proper conclusion. Need...
Hi Guys,I have 5508 wireless lan controller running code 7.2. We recently implemented Wired guest access on the WLC and configured necessary changes on the switch. We also have wireless guest profile as well configured on the WLC. We have some people...
Hello Guys,I have 2 IDSM-2 modules in two different 6500 switches. When I try to connect to them via session slot command I am unable to get the login prompt.1. In the first IDSM-2 it says trying 127.0.0.91 . . .Open and no username and password prom...
Hello Guys,I am facing issue with the CTI port, when ever people call from APAC [not local] the CTI port stays but after sometime it goes into a dead tone, IVR works fine for local calls, the issue is getting resolved after resetting the transcoder o...
Hi Guys,We just got a new UCS c220 server, we were deploying Esxi on it and all of a sudden it started alarming a beep sound and it is continuous, there are no logs generated either CIMC nor the led indications, what might be the possible reason, an ...
Hello, When you setup a UCS server freshly you will have to go through the process of creating RAID and in this case it is achieved by LSI Megaraid utility. So in case if you have RAID 10 running on the server the feature of RAID itself is giving the...
Hi Abhishek,Thanks for the inputs,How ever I am not concerned about the WLC upgrade but the 7.2.110.0 version's compatibility with WCS - 7.0.240.0 and NAC Guest server version 2.1.0RegardsKrishna
Hi Abdul,What I actaully did is I created 1 more ACL allowing any source any destination and applied that preauth acl in the Wired guest ACL, but the result was the same I had to authenticate again via web then I was able access different apps. By th...
Hi ScottI sorted out the issue it was due to some kind of Vlan mismatch we did have multiple dhcp scopes and few users were getting IP address from the right dhcp scope and they had no issues well this might not be specifically the case with other pe...
