Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts, We have a new requirement, in which we are planning to use the C90 codec with multiple input camera's and pc presentation. Our customer wants to send three sources at a time to far end. (like two cameras + presentation) . Please confirm i...
Hi All,We have one c series endpoint with ISDN link. How can I dial a audio call from C -series endpoint. Currently we are able place video calls to other video endpoints, but calls to telephones/mobiles were not going.Please guide me is there any s...
Hi All,We have a new site with Cisco telepresence content server. There is some electrical work is going on and sometimes there is power failure. After each power failure we have to manually turn on TCS. Is there any way , we can make it automatic. S...
Hai all,We have 1080P precision HD camera connected via daisy chain. We wants to do software upgrade for the same over the network.I found the document for the same, mentioning ftp transfer of software to the camera. But where i can down load the cam...
Hello,In our VC enviornment, we have around 10 edge 95 MXP endpoints and 20 E20 endpoints and TMS. We don't have VCS control. Currently we are calling the device by ip address. We recently deployed the TMS application and management wants to use the ...
Hi Experts,Can you tell me the expected time frame for TMS software which will be compatible with windows server 2012. We have new requirement to install TMS on a new machine. currently we don't have any windows server 2008 licenses and it is end o...
HI Marius,Thank you. Got it. we are able to place call through web interface.But through remote control , is this setting is available. please confirmThanks.
Hi Tufan,I do have a VCS control without device provisioning option key. I have sent email to [email protected] with vcs control serial number and they were able to provide the option key.RegardsBinesh.
