Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, We have a unique requirement I think? We require that inside hosts, can access a host on the DMZ via both its public address and its private address. So if the Real DMZ address is lets say 10.1.1.1 and its public address is 1.1.1.1 we need any ho...
Hi Guys,We have installed N1K working no problem and now installed ASA1000v with VNMC using ASADM mode. The device is registred to VNMC and Security profiles set, access rules set against with NAT. Port profiles created on the N1K with the VNMC path ...
Hi,Sorry but I am new to EEM and would like a sanity check on my two EEM applets. We are trying to isolate our two DC's at layer2 from Spanning tree topology, filter BPDU's on all EoMPLS uplinks to create two active DC's. To prevent loops we have the...
Hi,I am hoping that someone may have experienced some of the following errors we are experiencing between a pair of 3750 Stacks via an EthoMPLS link. Recently we enabled spannning tree logging on both switches. The reason for this was that we were ex...
Hi,I have exactly the same question, we want to be able to only license two out of the 6 hosts in the cluster for VSG, what is the stance from Cisco on this is it possible?RegardsDarren
Hi,I have the same issue with Nexus100v. As a user i can successfully authenticate however the level of privilidges is pretty much restricted to ping and traces. We are using Windows Server 2003r2, my same user and password are fine for Catalyst base...
Hi All,This issue is now resolved. Although I had defined the VSG security Profiles, and assigned the VSG to the Tennat. What I had failed to perform is the Assisgn to VSG in the same Window, seen at the top right hand corner. It does appear that the...
Dear Skalje,I am having the same issue. I have a ASA managed via ASDM with VService Node configuration iusing 10.1.1.1 for its inside address and for the VSG 10.1.1.2 for the data0 interface on the VSG. However the ASA is reachable but the VSG is not...
Hi,Im having the exact same issue when configuration the vservise node and orggs2-cldnexus-01(config-port-prof)# org root/CUST012013 Jul 18 08:51:19 gs2-cldnexus-01 %VNS_AGENT-3-CORE_DEFAULT_PROF_ID_ERR: VNMC resolves default-service-profile for port...
