Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,As part of the N5k upgrade process, the system outputs the info below:Module 1: Refreshing compact flash and upgrading bios/loader/bootrom/power-seq.Warning: please do not remove or power off the module at this time.Note: Power-seq upgrade ne...
hi guys,I have seen many examples of double sided vPC between one pair of N7k and one pair of N5k, I cannot see why it would not work between two pairs of N5k, could you confirm? any limitations?thanksming
Hi guys,I just completed an system cutover from CUCM 6 to CUCM 8.6. one of user reports that she used to see phone display with dates that has 3 letter month, rather than two digit number, and now in new system it's only 2 digit number for the month....
Hi all,I am having problem with N1k in the below topology:Nexus 1010 VSA (running VSM) --- Cat 3750 --- Cat 6509 --- Nexus 5548 --- Nexus 2232 --- HP VC Flex-10 --- HP BL 490c G7 ESXi (running N1k VEM)VSA: version 4.2(1)SP1(2)VSM/VEM: version 4.2(1)S...
Hi all,I am looking for UCS logical visio icon and can't seem to find them, such as 6100 Fabric interconnect and 5108 chassis, like thisI found this link, but there are only phsyical icons, not logical ones.http://www.cisco.com/en/US/products/hw/prod...
thanks for the reply..I am upgrading from 5.0(3)N2(1) to 5.2(1)N1(1a), and the install all command actually said power-seq upgrade is not required, it still prompted to power cycle to complete power-seq upgrade. I guess It's just a standard msg and ...
hi GP,Thanks for your reply, I don't find such option in CUCM 6 either. I think the user might be dreaming about seeing the 3 letter format.let me know if anyone finds such option.thanks.
Hi David, it doesn't sound like you have other options. You can create another port profile with the same config without the Sys vlan, move all the VMs into it, then you should be able to delete the old port profile, you won't have any outage this wa...
Thanks for the enlarged version of them.Sorry,you were right, the .vss you posted is not empty, but double clicking the .vss file there is really nothing in there, but if dragging .vss into a open drawing. it does show up?! not sure why, I am running...
