Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey allI have a Firepower 1010, I need to disable the SIP ALG on it, I have access to the Web Client and Telenet access to make changes, can someone give me an easy way to make these changes, I don't have the ASA Software that could access with.
looking for 800 Series Router Config help.(This gives me 512 host which is what i want0ip dhcp pool insideimport allnetwork 192.168.34.0 255.255.254.0dns-server 10.5.90.1 8.8.8.8domain-name gleamnsdefault-router 192.168.35.1The following access list ...
Hello All
I would like to extend the ip address range for the router, but not working like i though it would.
ip dhcp pool Poolimport allnetwork 192.168.35.0 255.255.254.0default-router 192.168.35.1domain-name gleamnsdns-server 8.8.8.8 4.4.4.4lease 0...
HelloI need help on setting up the two wan ports on the router for load balancing, they need to be DHCP on the port 4 and 5. I can make it work with one wan port just having figured out how to add the second wan port. any help would be great.
Hello i have a new 861 router no wireless or anything and i am having trouble gettting it to work. i put the IP address on the Fastethernet 4 and the inside ip address on the VLAN1 i can ping out from the router both ways to the ga...
I have a weird problem when i log into the Firepower the web page GUI is like this below, anyone know how to fix this. I can ssh to the command prompt. but haven't figured out what i need to do other then factory reset and reload, it is a production ...
this is the way most of the routers were setup a long time ago, i have just followed along keeping them going, so i will look at doing the Ip nat, something like this. ip nat inside source list 10 interface GigabitEthernet4/0 overload , 10 permit 192...
ok here is what i have at this time, it will pull IP Addresses but will not browse the internet
hostname Router!boot-start-markerboot-end-marker!no aaa new-model!ip dhcp pool centerimport allnetwork 192.168.100.0 255.255.254.0default-router 192.168.1...
