Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi We have successfully uploaded the Boost license but not activating the same. Please check below pasted error file and do needfull StoreIndex: 2 Feature: booster_performance Version: 1.0License Type: PermanentLicense State: Active, Not in UseLicen...
Hi Team after initializing IOS up-gradation facing challenge on boot with below error Initializing Hardware ...Checking for PCIe device presence...doneSystem integrity status: 0x610Rom image verified correctlySystem Bootstrap, Version 16.7(3r), RE...
I just tried to establish a fiber (MM) connection between a c2960x and a c2960x using SFP-10GBase-SR modules on both sides, but link is not coming upBoth side link not come up and while check getting TenGigabitEthernet1/0/1 is down, line protocol is ...
Hi team My CISCO1941/K9 show some errors like interface is up but protocol down please check the below log and let me know the possibility of the particular issue Router#sh interfaces serial 0/1/1Serial0/1/1 is up, line protocol is down Hardware is ...
So you are using x.x.x.x/29 address right so by using one switch in between your ISP router and firewall you could able to extend your connectivity to different devices.
please go head, there is no need any configuration on your Switch
thanks
you got public IP or private?
i want to make the Switch to forward one specific adress per port.? please make details means for what and how you going to connect
thanks
Johnif I am configured Vlan 80 on my pc and connected to ge1/37 I am able to access Internet from vlan 10 not able to get internet but from VLAN 10 ip configured system I could be able to ping VLAN 10 interface IP and VLAN 80 Interface IPthis is co...
