Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, i have a cisco router 2921 with voice licence and i want to configure SIP trunk with my provider. the configuration is next:voice service voip no ip address trusted authenticate address-hiding dtmf-interworking rtp-nte allow-connections sip to si...
Hi,i am using cisco switches for network access, mostly, 2960S with PoE, configured with dot1x and MAB authentication. dot1x for computers and mab for phones. radius server is on MS 2008 r2 - nps service. workign fine, all my pc are added to domain. ...
Hi,my frewall IOS is 8.4.6, and hardware - 5510i have two outside interfaces, one via inertnet and another once connected to MPLS cloud. both interfaces are bounded to one physical interface like subinterfaces.i want to prioritize voice and voice sig...
Hi,So, finnaly i have installed two 5525X firewals in A/S failover. working fine, CPU is ok. memory behave very strange. it is growing day by day. i have a week already firewalls installed and the memory grew from 20 % to 51 %CPU is arrounf 20- 30 % ...
Hi,yesterday i have upgraded my live asa to new version asa845-k8.bini read that a lot of bugs were fixed and some improvements with per user acls (need this feature).After upgrade (zero downtime - i have A/S environment) my CPU and Memory were down:...
Hi,i have same issue between a customer SonicWall 6500 and our Cisco ASA5510 with 8.4.7so, sometime all the SA are down. i just was clearing the ikev1 and monitoring if SA got UP. unfortnatelly only part of SA got up but the orther not. after another...
Hi Guys,active FTP will work. passive FTP does not work with 9.1.1. i was able to do passive ftp via asa with 9.1.1 only after i have removed ftp inspection. asa was droping ftp packet from internal server when this one was sending responce to ftp pa...
OK, so how i solved the problem:between my lync and cisco router i had ASA firewall, and what i did, i have just moved them in same network. it solved.i will check why asa does not allow sip via tcp. it does inspection for sip via udp, as i knwo
Hi,so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.here is m config:vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family!voice vrf Mgmt-intf!voice service v...
