About Svante Bolander

Svante Bolander · 02-26-2015

We have a cluster of two ASA5585-SSP60. One Master and one Slave. From NNM the boxes are polled with v3 on their individual interface address in context admin. The Master is OK with SNMPv3 and returns replies, but the Slave says "Authentication Failu...

Svante Bolander · 02-01-2014

R1 in AS 65544 is originating 198.18.0.0/24 and that prefix is received to R2 which is running AS 197308(public AS). R2 has a peer in AS 3(upstream ISP) and I would like to forward 198.18.0.0/24 as originated in AS197308 to AS 2.I have tried using ag...

Svante Bolander · 05-04-2013

We are planning an upgrade of a few 6500-Sup720-10G from SXJ2 to 15.1(1)SY1. The 6500 systems have redundant Supervisors(SSO) and WiSM blades. ISIS and MBGP is configured for NSF with uplinks on both Supervisors. No linecards (except WiSM).It is stat...

Svante Bolander · 03-27-2012

I have struggled for some time with DMVPN tunnels hanging and not recovering. The tunnels are part of a DMVPN where some spokes ara behind NAT/PAT and som are not. The problems only occur for spokes behind NAT. At all times there are no problems init...

Svante Bolander · 12-03-2010

I am trying to use the AUX port on a ASR 1002 to connect to a console port on another router. Usually you telnet to port 2000+line number and then you are on the AUX with an outgoing connection. But I can not figure out how to do this on ASR. I am ru...

Svante Bolander · 05-27-2016

I also have a C819G-4G-G-K9. Suddenly a few weeks ago the modem got unaccessible with this message: %PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH: and show cellular shows no info. NAME: "Modem 0 on Cellular0", DESCR: "Sierra Wireless MC7710 4G-G"PID: MC77...

Svante Bolander · 05-01-2016

Did you find the root cause for this? I am asking because I have run into the same problem with my 819. Is there any other way to communicate with the modem and check status of it? AT commands?

Svante Bolander · 12-28-2015

I also have an IR809 for testing. It is currently running 15.6(1)T0a and that image has ip sla sender. Also 15.5(3)M1 has ip sla sender present. Another way to generate interesting traffic is to use NTP. Or sending SYSLOG. I have no problem activatin...

Svante Bolander · 05-06-2014

I am seeing the same message on 3560 after upgrading to 15.0(2)SE6. Before it was running SE5, in which DHCP Snooping was broken, and SE4. Both did not show this messages.The %ADJ-3-RESOLVE_REQ messages is populating the log very frequent. It seems t...

Svante Bolander · 02-02-2014

This works! I had read that the feature was for injecting more specifics. But after your suggestion I tried it in my home network and even that I have the same mask on the learned prefix as on the one I want to inject, it works.Tule7640#sh bgp ipv4 u...

Member Since	‎10-14-2002 02:13 AM
Date Last Visited	‎04-18-2018 04:08 AM
Posts	36
Total Helpful Votes Received	15

User Statistics

User Activity

SNMP v3 on ASA Cluster? Only Master works.

How to originate a prefix from own AS when the prefix is received from a neighbour AS.

WiSM surviving upgrade SXJ -> SY1?

IPSec tunnel w NAT-T hangs on QM-renegotiation and does not recover.

How to access AUX port on ASR?

I also have a C819G-4G-G-K9.

Did you find the root cause

I also have an IR809 for

I am seeing the same message

Re: How to originate a prefix from own AS when the prefix is rec