Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So if I set a hunt group up, but nobody is logged in and a call is recieved can we enable the queuing to allow the call to stay queued until somebody logs in or do I have to send it to an auto attendent or vmail box?
Thanks,
We are upgrading our internet from a 50mb to a 1gb connection.
Currently running a 3825, only requirement is DMVPN termination.
3945 vs ASR vs 4451 or is there another option I'm missing?
Thanks,
I'm running Call Manager Express on a 3825 with a single PVDM2-64, using on PRI.I have 5 7936 conference phones that are able to dial out and connect.I'm using an off site 800 meet me number that everyone dials into. If the phones are on mute they se...
We have a Cisco Call Manager in a large metro area with 10 digit dialing.The problem is some of the numbers we dial in the digit still require a 1 because they are technically long distance.Currently I have to add multiple rules to either add a 1 or ...
So I've got a 5510 Active/Standby pair setup.I'm looking to upgrade from 8.4.4 to 8.4.7 for the heartbleed fix.I'm doing this remotely and have a laptop with a console cable connected to the standby unit.This is what is confusing me. When I do a sho...
Sorry, maybe I should start a new thread. We are using a SIP trunk that requires MTP endpoint to a 3rd party IVR server. We are having the identical issue though after about 40 calls we notice CUCM no longer sending the SDP header when it initiate...
Right now they aren't connected so I'll have to bring them back up.There really isn't a meet me config on the router. The 800 is off site and we are just dialing into it using the 7936 phones.The fact that it is showing unregistered abnormally makes...
