Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Moving from a H323 PRI to SIP Trunk for PSTN calls. The SIP is showing name and number, but in missed calls it only shows the name. No number is associated with the name when you go into EditDial. The PRI only showed the number and in missed calls...
I have a 2821 primarily acting as a dspfarm for a CCM 4.1. I've had to restart the router twice do to a possible over utilization of the DSPs or a memory leak. I have a TAC case open and they are concentrating on the memory leak, but still want to...
Remote site has 7960 phones, Linksys WRT54-G wireless, and Cisco 827 DSL coming back to a callmanager 3.3 When we power on a 7920 phone the 7960 phones will unregister with the call manager, but the 7920 will work fine. Turn off the 7920 and the ...
I'm not getting caller id info on inbound calls. The IOS on the 2400 is c2420-a2i8sv5-mz.121-5.XR1 with 16 FXS and using MCGP. I don't have any problems with caller id on IP phones, H323, or ATA186, but if I hookup an analog phone to the IAD - not...
Yes. You can pull certain statistics and put them into http format. Upload your http script to the UCCX then browse to :9080/your_web_page.Sent from Cisco Technical Support iPad App
No, I'm trying "Click to Call" but still having issues. Works fine on Excel but not on Outlook contacts. Haven't opened a TAC yet - don't know if they support it.
Having the same problem on WindowsXP Professional Version 2002 Service Pack 3. TAC won't help. The TSP installs and you can see it under "Sounds and Audio Devices" hardware, but it doesn't show up under "Phone and Modem Options".Any thoughts or ide...
Called number is 4042872150Calling number is 8655833149The CCM is 4.1(3) no patches. Phone is 7960 SCCP running 7940-7960-sccp.7-2-4.exeI've also tried phone load 8.0.3The trace is attached When the call rings the phone you can see name and number. ...
