Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a 3750E-48PD new switch which was added at access layer. We have configured it for connection to end user ports. However, upon final configuration completion, I am able to telnet into the switch but not able to SSH into it. When i telnet i...
Hi, Is there are any command to check the statistics on Wi-Fi usage & utilization on WLC? Like during the duration from DD/MM/YY to DD/MM/YY , how many clients got connected ,to which they AP connected to and what was the bandwidth they got and what...
Hi, I have 2 layer vlans created on my core switch. These vlans are advertised on eigrp protocol running on the core switch and subsequently advertised on bgp in the routers connected to the core switch. The 2 Vlans are Vlan 12 and Vlan 13. Vlan 12 i...
I have a scenario. Two major companies have their Two switches connected together (3750X-24P) via a patch cable. The link between the two switches is an access port. I want Vlan 12 to communicate with users of Vlan 15 on other side. I know on trunk p...
Hi , I have a question. Can we find out about the type of antenna used in an AP by logging into AP. I am looking for any physical survey or assessment. I am looking for is a bunch of commands which could be used to identify the antenna type by issuin...
I think we can stack IPServices and universal image together. You could try to download the SE5 version of the IPServices from below link https://software.cisco.com/download/release.html?mdfid=279486488&flowid=2518&softwareid=280805680&release=12.2.5...
This is a case of mixed hardware and software stack. I believe you could try to convert either of them to same.image by deleting files from flash and then try to.copy from stack master to slave. I would rather try to change ipbase
Anyone can correct me If i am wrong I think this is possible and this scenario is generally called mixed hardware stack. Make sure there is no major IOS mismatch between the two members which will not allow/hinder with the stack. Master will pass thi...
