Hi,
Is there any limit of how many line cards N9K-X9736C-EX can be installed on one 9504 chassis? all 4 FM installed...
would 4 such line cards will cause any issue or not be accepted?
Hi,
Since we have one year license for our WSA, I would like to set an alert that will be send by Email when the license is about to expire.
is that possible?
Thanks
Hi,
I have a pair of Nexus C9372PX configured as vPC peers running version 7.0(3)I1(3).
NTP master is configured on both of them. they are configured with 3 NTP servers and can get time updated from them.
I am running the NTP master feature and it is...
Hi,
I have a UCS system running on version 2.1(1a) and I need to upgrade it to 3.1(1e).
I could not find any related document for upgrading from this version to 3.xx
can it be done directly or should I go into intermediate version such as 2.2(5) or s...
Hi All,I am trying to change the CoPP policy from default policy to customized policy on Nexus 5548UP running 6.0(2)N2(2).After modifying the 'copp-system-policy-customized' policy and applying it to the control-plane I still see that the default pol...
Thanks for the quick response.
I am at version 2.1 and the target is to be at 3.1 so according to the links you provided, it looks like the upgrade process must be done in two stages just like you said.
Thanks again.
Hi,
LLDP and NPIV are not related here since you are facing an issue with the initial connectivity.
LLDP is used with FCoE and NPIV is used when you are connecting an NPV switch and allowing multiple flogis to come from F port.
I would reccomand ver...
Hi,
copy the license file to the switch's bootflash (the file end with .lic).
run this command - install license bootflash:///<license-name.lic> fcoe.lic
Good luck