Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I have done an upgrade of the UCS system. I moved from 2.0 to the lastest new one. While performing the upgrade everything seemed ok, but after the whole process was finished, both FI 6248UP will not come up. LEDs seems to be ok, but neithe...
Hello All,I was able to get the FEXes in diagram "EvPC_standard_config.jpeg" working. o But I got the following doubt, is it possible to config the FEXes as if they were in only one EvPC? I mean, is it possible to get the "EvPC_Po500.jpeg" diagram wo...
Hello All,I am trying to loadbalance requests for webservices in a serverfarm. But for some reason, ACE20 module y not making matches on the requests. We have a serverfarm Prod1 with 2 real servers and another serverfarm named WSDL with other 2 real ...
Hi all,I've got 2 Nexus 5548 and a fex 2248 connected to both of them via a vPC. 1 Uplink port goes to N5K-01 e1/10 and a second Uplink port goes to N5K-02 to port e1/10.On the log of the first Nexus 5500 I see this:N5K-01 %FEX-5-FEX_PORT_STATUS_NOTI...
Buenas todos,Tenemos 2 módulos ACE20 en 2 Cat6500 diferentes. Tenemos 5 contextos más el admin, distribuidos 3 y 3 entre cada módulo para balancear las cargas de tráfico. Encontramos que en un módulo donde hay un contexto standby, las conexiones MGMT...
Hello Walter,Actually I haven't done the upgrade. I was just called in to fix the problem :). Yes, we all believe that we will need to talk to the TAC in order to see if there is a fix to this problem but I would believe that we will need to do an RM...
Hello all, The system was working ok before the upgrade. I took some pictures to show you what is going on. On the Picture above, you will see the console cable connected and the laptop display showing nothing although I hit enter. All leds stay gree...
Hello Walter,I did the upgrade using the cisco documentation for upgrading UCS system from 2.0 to 2.2.xI connect the cable to the console port, but no output is shown. No boot messages, no login prompt, nothing is displayed on the screen. I hit enter...
Hi Sean,thanks! As you said, figure 9 is what I want to accomplish, but I believe that you are correct when you say that it might be an error there.I will wait a couple of days more, if nothing else appears, I will mark the question as answered.Thank...
