Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a blade that doesn't boot from the virtual media. I can activate it and map the ISO on the KVM, but it doesn't boot from it. Also pressing F6 only gives me the Cisco Hypervizer or EFI Shell, no Cisco vKVM media is listed as an option.
UCSM is ...
I used the ssl vpn wizard to create an SSL vpn with a new group policy called sslvvpnpolicy. This worked fine, but while testing, it wouldn't connect unless ClientSSL is enabled on the dftgrppolicy. Even if I enable clientSSL on the new group policy,...
We have 2 ISP's connected to 2 ASR routers. iBGP is configured between the 2. We get partial routes from each ISP. As soon as we connect the iBGP session, our 2 routers exchange each other ISP prefixes. This causes one router to cease the BGP with th...
I have a need to use another class C subnet for outbound NAT purposes, but this new range isn't bound to the outside interface. Is this possible?Outside interface IP: 1.1.1.1/24Inside interfac ip: 10.1.1.x/24New block: 192.168.1.0/24New inside hosts ...
It's there....that was my first thought, and why I'm confused. Going into setup under USB it lists the vKVM virtual media...but it just won't use it as a boot device....
Are you able to access owa from the Internet thru TMG? If so nothing needs to be done on the Asa, you need to create a policy for it on TMG.Sent from Cisco Technical Support iPad App
