Hi,One of the port in switch module is connected to AP and recently this AP keeps disjoint from controller, upon checking on the switch interface we found that there is 2 input error & 2 CRC error.Does it mean the cable is faulty?ThanksSent from Cisc...

Hi,In an environment with two active WLC, if the AP multicast mode need to be enabled, the multicast address for both WLC need to be same address or both should use different address?ThanksSent from Cisco Technical Support iPhone App

Hi All,one of our client have 2 WiSM2 running active-active, there are around 130 Cisco lightweight AP 2602 series.most of the APs are quite near to each other and there are about 18 SSID.currently one of the issue we are facing is that when client's...

Hi,I have a 2500 WLC and I'm going to setup DHCP server in 3750x switch, one of the DHCP pool will be issuing ip address for AP. So, in the DHCP pool I should include option 43, am I correct? If yes, may I know what is the exact steps to configure th...

Hi ,We have 2 unit of WiSM2 deployed, one at Core switch1 and the other unit at Core switch2, these 2 units are belong to same management subnet for example 10.1.1.x 255.255.254.0we are able to ping both units but only able to get into the GUI of the...