Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a distributed deployment and each ISE node is joined to different Domain Controllers. Some of these Domain Controllers are going away and new DCs will be built to replace the old ones. How do I remove the ISE nodes from the old DCs and join t...
Hi, I have a SUP8-E on a WS-C4507R+E chassis. According to documentation, the uplink ports does support 1G/10G SFPs. I plugged in 1G SFP but why does it still showing "TenGigabitethernet" when you "show run" or "show interface". Is there any special ...
Hi NetPro,I am running into this challenge to convert IOS AAA configuration into an NX-OS equivalent. I have a couple of book but id doesn't help much in what I am doing. Perhaps, the NX-OS experts here would be able to give me a hand in the config t...
Hi networkers,I am curious on why is bandwidth only limited to 10G? Is this a known bug? What I am trying to do is put the bandwidth statement in an etherchannel (port-channel) with 4 x 10G bundle = 40000000.Does anyone know how to workaround with th...
Hey guys,I am not sure if I am missing something but, do you have to enable service DHCP if your router is NOT functioning as a DHCP server but only as a DHCP relay?
hi bennaceur,you can try to implement pbr (policy-based routing) to have some control on your multiple WAN connections.worth a visit:http://www.cisco.com/warp/public/732/Tech/plicy_wp.htmbest regards,mike
Hi,You must activate the command "ip accounting output-packets" under the particular interface you want to monitor on the "interface config-line";Afterwhich, to view the accounting..simple issue "show ip accounting" on the console.Hope this helps.Br,...
