I have 2 1310 wireless briges in a point to point configuration with the root bridge acting as my ACS server.. I am currently running Leap Authentication and with Wep encryption but would like to upgrade this to use Peap and AES if possible??I'm wond...
Since cisco 7911 SCCP phones are EOL, what is the closest Set? The 3900 series are SIP, Does cisco SIP provide the same funcionality as SCCP or compare to Third party SIP phones without the functionality of failover etc...
Hi..I am having issues upgrading the firmware on my 7911 phones, all other phones appear to be upgrading fine. I am using a dhcp server on the lan with Option 150 pointing to the call manager.The 7911's are not showing the TFTP server ip under the ne...
Good day,I am seeing ouput errors on a half duplex interface facing a comtrend modem.What could be causing this? I'm not seeing any other errors besides collisions which are normal for half duplex.
Thanks Chris,Appreciate your feedback on this. Do you know if Cisco 3900 sip phone will failover to the Publisher if the Subscriber fails and vice versa? Third party sip phones do not do this with ease, in most cases you need to use DNS to point to ...
Ethernet1 is up, line protocol is up Hardware is PQUICC_FEC, address is 0011.20da.dcb1 (bia 0011.20da.dcb1) Internet address is MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation A...
Thanks Michael..If the Publisher's gateway is using an external NTP and is synced, the gateway should pass the ntp along if i have my gateway ip set as the ntp server in the PUB, correct?ThanksJamie
Hi Michael,Here's a copy of the ntp status on the Publisher. I think the problem may be the publisher not syncronizing with the NTP server.admin:utils ntp statusntpd (pid 693) is running... remote refid st t when poll reach delay...