Hi,
is it possible to initiate ssh session from Nexus to non-default SSH port?
For example, I want connect via SSh from NX-OS to SSH server via port 922.
BR, Mate
Hi,
I need to create EEM or TCL scrript (or combination) which will shutdown (or remove VLAN from) particular interface, but before that it need to chech status of tracked object (or SLA).
If status of TRACK is UP than script need to shutdown inter...
Hi,
I have N7k (NX-OS 6.2(2)) with SUP1, M1 and F1 linecards.
I need to export netflow for traffic in VLAN 30 and I configured bridged netflow. Config is:
flow exporter NF_EXP destination 10.10.101.11 transport udp 9993 source Vlan101 version 9
flow ...
Hi,
I have 4 policy servers between two Nexus 5600 switches. Server are fully L2 transparent and each server has two interfaces.
From perspective of Nexuses each server act as a wire so from L2 perspective Nexuses are directly connected. Port E1/1 on...
Hi, we are considering connecting FEX 2300 to Nexus 9300 using 40G link, but on true 40G QSFP+, not 4x 10G SPF+ on Nexus 9300. Is this configuration supported? I have some unchecked informations that this is setup is not supported. Is there any docum...
Yes, here is the flow record:
sh flow record NF-L2Flow record NF-L2: No. of users: 0 Template ID: 0 Fields: match interface input match interface output match datalink mac source-address match datalink mac destination-address match datalink source-vl...
Hi Mark,
tnx for reply.
I read that documents, but I want to configured bridged netflow which should be supported and it' need to be configured under VLAN.
Configuring Bridged NetFlow on a VLAN
You can apply a flow monitor and an optional sampler t...
Hi,
yes, I know for ITD and we are currently testing it for our solution. Something like:
http://blogs.cisco.com/wp-content/uploads/ITD-with-L2-ASA.pdf
But, there are also no any informations regarding symmetry of traffic.
What kind of solution t...
