Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am in the process of making sure our type 7 keys are changed to type 6. To do this I use the "key config-key password-encryption" and "password encryption aes". I have not had any issues until I reached our IE 2000 industrial switches. We have upgr...
We have a third party company providing a 9300 switch stack for a solution on an air gapped network. We must use the licensing reservation feature to get the Smart License on the switch as there is no connection to the Cisco Licensing site.These swit...
I need certain users to authentication their enable password against our TACACS server. To do so I issued: "aaa authentication enable default group TACACS enable" I also want my console line to use the line password and then the local enable password...
I have two ASA 5545 running 9.7(1)4. They are an active/standby pair. Failover on all interfaces is working except for one. I am getting repeated log entries every few seconds for this interface of:ASA-1-105008: (Primary) Testing Interface "Interface...
I have ran into an issue with an VLAN SVI IP Address on a 3850-12S switch. The current IP is set to 172.20.3.1/21. There is another 3850 switch upstream of this switch and a 2960X downstream. I have a server plugged into the upstream switch that resi...
We are running the same ASDM and ASA versions ASDM v7.19(1)90 with ASA v9.18(3)56 and we have the same issue. I have a TAC case opened to see when this will be addressed as I do not see it mentioned anywhere in the release notes of 7.19 or 7.20.
I figured this out. My only two options are to either raise the privilege level on the console line to 15 or create a console username and password with level 15 access and make the console use the local database. Not a perfect situation as the conso...
Here is what I am able to provide for the two switches. I am working on trying to collect the arp entries and a possible trace route.
Switch 1:
Server is connected to port Gi1/0/3
Switch 2 is connected to port Gi1/1/2
no ip source-routeip routingno...
I will see what information I can provide as far as configurations. Customer has strict security policies in place so it is difficult to get copies of the configurations. All pings work fine from 2960. The only think that is not working is pinging fr...
Here was part of TAC response: The queue-limit will need to adjust depends of how many packets the class is getting then it will adjust with the proper size.We recommend to double size the queue-limit and eventually the drops will disappear, you can ...
