HI, I am use the standard MQS to configure the QOS on the 5k FEX ports. With the access-list for RDP traffic I want to set the dscp value. It looks like from my capture on 7k, the dscp value is 0. I think either the 5k did not mark or the 7k reset t...

Hi, It looks like I have to configure the remote branch site prefix manually and then can see it from hub master. I have this collector configured but not sure what it for? collector 10.64.196.2 port 2055 2 when i run show domain default master traf...

Hi  I just want to run a ping or trace tcl script on the 7k, but how to export the output to a file automatically? I can log the output from securecrt but try to find a easier way. Thanks

I have configured two site to site vpn on the two routers. The core switch is connected to vpn router. To avoid configure lots of static route I configured the reverse route on both sides. From the test It looks like i need to configure some staic ro...

I have two fex 101 and 102 with dual home design connectiong to the two 5k. I understand when I configure the L2 on the fex port example eth101/1/1I need to configure this port on both 5k. I now have a router with L3 port connecting to fex port examp...