Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does Cisco VPN client block incoming traffic from the local network ? We have a split tunnel policy tunnelspecified and ACL will cover all RFC 1918 [ 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 ] . When we connect to VPN from local home network 192.168...
I generated EEM script for Duplicate IP address detection, but i do not know how to trigger email in NxOS. event manager environment emailto "xyz@abc.com"event manager applet Duplicate_IP description "Detect Duplicate IP and Send Trap" event syslog...
Nexus 7000 blade N7K-M132XP-12 question : I know the oversubscribe ratio on this module is 4:1, if we used in share mode and 1:1 for dedicated mode. But when I use only two or three ports out of four ports in port group. It means my oversubscri...
I would like to block incoming connection to and from local network while using a split tunnel policy “tunnel IN all RFC 1918- all private “ and internet ride local.
Thank you for sample configuration, but it will not help us . We do not want to mark internet traffic as value " EF" . It will be bad qos design. Only voice traffic we should mark with EF value. Any way let me tweak little bit configuration and make ...
You may not need to creat interent class because its so diverse ip range and protocol range[unknown]. Probably create class map for your office traffic[IP subnet you already know], and fall other thing in internet traffic. Or second option is to have...
Hello,You can separate your Core office subnet with ACL, Apply route-map and QoS policies base on route-map and ACL combination. So ACL matching traffic will be your BO to CO business related but other than that will be internet traffic. You can appl...
