Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We are having a problem with ISE-AD NTP Synchronization. Found similar threads about NTP Synchronization, but although ISE-AD Ntp sync is recommended, it seems that some compatibility problems may occur. Instead as a workaround synching with ot...
Hello,2960S LAN Lite switch with Dot1x and Mab configured successfully authenticates 802.1x clients. However for the non authenticated guest clients, we would like to assign a guest vlan, which requires "dot1x guest vlan x" command under the interfac...
Hi,ISE Virtual Appliance Supports VMWare ESXi as Hypervisor. Is there any Plan on the roadmap that ISE will be supported on HyperV (or possibly XEN) in the future, because some customers don't have VMWare but using only HyperV. The same question may ...
Hello,We have configured MAB for hostst that do not support 802.1x, and in general working for most of the devices. For Some linux machines however, MAB is never triggered, i.e "debug mab all" and "debug radius" commands do not produce any output for...
Hello,We would like to guess about the maximum number of Remote Access VPN Clients (IPSEC or SSL VPN). The Endpoint may be ISRG2 or ASA FW series. In the attached documents, the maximum numbers are given as a general guideline, but we think this nu...
Hello, What is the difference between "Manufacture Cisco DNA Appliance" and "Maglev Installer" options, which one is used when? Both seems to reimage the DNAC Appliance Also Fast initialize the Virtual Drives(VD) from the CIMC and using the Raid uti...
1.) If VTEPs advertises every end host’s information while they attach, in what circumstance ARP request is needed? Will the information timeout?VTEP as knowing the MAC, IP Addresses of the remote Host, it may reply to an ARP Request from a locally a...
If there are 10 vteps(switches), how could VTEP1 know to send packet through Vxlan to VTEP8, and not VTEP6? It looks to BGP table where the table of Mac, VTEP pairings exist
It seems that the interface command "dot1x guest-vlan" has been depreciated long time ago with IOS 12.2(50)SG and later releases:http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/54sg/command/reference/cmdref/ch2a_ins.html "authenti...
Hi Charles,The link you provide is very good that explains the features that Lan Lite is not enough, at least Lan Base Feature is needed for: (Though for 2960X, that should be valid with 2960S as well) Web AuthenticationMDA (Multi Domain Authenticati...
