Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know if the 1815T Officeextend AP is compatible with vWlC 8.5.103.0? according to the documentation I have seen it should be but I am seeing the AP pull an IP address and partially join before continuously repeating the process over and ...
Hi All,
I have set ISE 2.1 up in a virtual lab environment and when I create a CSR I get an error syaing that ISE is not reachable?
I am also unable to delete the CSR certificates with an error message very similar stating that ISE is not reachable...
Just wondering how everyone is currently managing O365 IP’s on the ASA’s at the minute?
I am currently going through the list that MS provide and just copying out the hundreds of IP’s/Subnets and referring them to an object-group which then gets re...
Hi all,
I have recently installed vWLC and am having difficulty in getting either of my 2 1852i AP's to register. From the logs on the AP the reason seems to be down to a certificate error.
A quick search on Google and browsing the release notes I ...
Hi All,
Does anyone know of a command to clear the maximum conn counter on a Pix 501. Have had a look around the internet but can't seem to find a command that clears it?
Really don't want to have to do a reboot!
Thanks
Shaun
I have upgraded the vWLC to 8.5.135.0. The 1815T updated it's firmware ok but is still in the same state where it seems to register briefly and then drops off again with the same error message again "Unsupported Platform, Config Request Rejected AP...
For anyone else that has this issue in the future I ended up spinning up another VM of ISE as the one I was having issue's with also started to have problems loading up the GUI etc. Almost seemed like the VM had got corrupted. After a fresh install ...
Thanks Paul. The only thing I am missing is the latest patch which I am unable to download at the minute, as soon as I get it on I will let you know how I get on.
One thing I did forget to mention in my original post was that this did work briefly...
