Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an issue were iOS devices are taking about 45 seconds for the web page to pop up for authentication. I know it is an issue with the CNA, but I'm stumped. Has something changed? I've never had this come up before. It does work, it is just slow.
Working on a fresh deployment of ISE 2.3 with Patch one applied. I've setup authentication into ISE to use AD, but some data is being filtered. I've created a single AD group for admin access, and I've created the linkage between that group and super...
There is a bug in 1.4 patch 3 on the SMS gateway settings of ISE. If you attempted to add a new SMS gateway with the SMS Email Gateway option you have to enter an e-mail address in the optional Provider account address and SMTP API destination addres...
I have a hand few of really old 1130's, manufactured prior to when MICs were installed. In anycase I wanted to convert a few of them to lightweight for use in a remote location with a 4400 we have laying around. Long story short, during the upgrade p...
I'm working on a BYOD deployment and I've run into a snag. When a windows PC runs through the provisioning process they recieve a certificate without any issues, but iOS devices fail with the error: The registration authority's response is invalid.An...
I set up to do a capture to see what the devices were checking, but they have 2800's, so that won't work The customer is going to try to do a packet capture for me on the network so I can see what is happening. It was very concerning (the slowness)...
Not yet. I can see the URL redirect is there though. Oddly one of the iOS devices we have been testing doesn't trust the cert (Geotrust cert) and we immediately get the cert error on redirect and can click past and the page is there. I'm wondering if...
The switches are all on 1.3.0.62, and the boot version is 1.1.0.6. When I try to upgrade either the boot code of the image to sx500_fw-13558.ros and sx500_boot-13506.rfb I get the Copy: Illegal software format error.Grrr
