Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've had L2L tunnels set up to a couple of remote sites (PIX) for several months now. We have a VPN concentrator, which will be going EOL soon, so I'm working on moving our existing RA clients over to our ASA. I'm having trouble allowing the RA clien...
I recently inherited a 4006, which I'm attempting to trunk with our 3750 stack. I have fast ethernet ports on both ends set up to trunk according to the instructions here:http://www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example0...
I've successfully set up l2l VPN between our main site and 2 branch offices. Now I would like to allow additional networks from the main site to access the branch sites. The Cisco doc here (http://www.cisco.com/en/US/products/ps6120/products_configur...
There's a thread here somewhere which helped me get my 2106 set up with one WLAN, a guest WLAN. Now I'm trying to set up a 2nd WLAN on the same WLC. I created a new dynamic interface, WLAN, and corresponding AP group VLAN. However, the lone AP in the...
We currently have a stack of 5 3750s which operate as combined core and distribution switches (for the building where our data center is located). The breakdown is 2 WS-C3750G-24TS and 3 WS-C3750-48TS. This gives us 212 ports, of which roughly 140 a...
Sorry about that. When I posted my clean config before, I realized that I was using an older config. So I did a quick cut & paste from CLI to the config I posted, and I must have missed the split-tunnel-policy line, which was:split-tunnel-policy walt...
Walton is the remote site. I was under the impression I needed that configuration from the config example in the second post.Routes on the VPN client are:172.16.0.0 255.255.255.0172.16.26.0 255.255.255.0
Well, I don't want to second-guess you after helping me out, but... I have a laptop setup outside the main ASA, connected via VPN client. From that laptop I can ping a host on the remote site, and bring up Google.
Doh! I don't know how I missed that. That seems to have done the trick!The only concern will be the use of split tunneling. Right now (through our VPN Concentrator), we do not allow it. Is it possible to allow access to the remote L2L sites without o...
