Hi, I have a problem with a ddns configuration on a Cisco 887va. I have a free account in no-ip.org but, when i configure the router with the configuration of this site, my router doesn´t update the public IP on this site. the configuration is the following: ip name-server 8.8.8.8 ip name-server 8.8.4.4 ip ddns update method no-ip HTTP   add http:// ****: ****@dynupdate.no-ip.com / nic/update?hostname =<h>&myip=<a> interval maximum 0 0 5 0 interval minimum 0 0 5 0 interface Dialer0 mtu 1492 bandwidth 800 bandwidth receive 20000 ip ddns update hostname test1home.no-ip.org ip ddns update no-ip host dynupdate.no-ip.com ip address negotiated ip flow ingress ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap pap callin ppp chap hostname xxxxx@xxxxxxx ppp chap password 7 xxxxxxxxxxxxxxxx ppp pap sent-username xxxxxxx@xxxxxxxxxxx password 7 xxxxxxxxxxxxxxx no cdp enable ! Best regards. ... View more

Hi, We are having problems with incoming calls, when someone makes a call from the outside he can hear the tones but it doesn´t reach the internal phone. I have made a debug isdn q931 and it shows some errors that I don´t understand,         Bearer Capability i = 0x8090A2                 Standard = CCITT                 Transfer Capability = Speech                 Transfer Mode = Circuit                 Transfer Rate = 64 kbit/s         Channel ID i = 0xA98381                 Exclusive, Channel 1         Facility i = 0x9F8B0100A1080201480201008400         Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band info         Calling Party Number i = 0x00C3, N/A                 Plan:Unknown, Type:Unknown         Called Party Number i = 0xA1, '9xxxxxxxxx'                 Plan:ISDN, Type:National *Sep 19 07:52:11.416: ISDN Se0/0/0:23 Q931: Received SETUP  callref = 0x9E88 cal lID = 0x0046 switch = primary-5ess interface = User *Sep 19 07:52:11.420: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8  callref = 0x 9E88         Channel ID i = 0xA98381                 Exclusive, Channel 1 *Sep 19 07:52:11.640: ISDN Se0/0/0:23 Q931: TX -> PROGRESS pd = 8  callref = 0x9E88         Cause i = 0x8181 - Unallocated/unassigned number         Progress Ind i = 0x8188 - In-band info or appropriate now available *Sep 19 07:52:11.708: ISDN Se0/0/0:23 Q931: RX <- STATUS pd = 8  callref = 0x1E88         Cause i = 0x80E308 - Information element not implemented         Call State i = 0x09 *Sep 19 07:52:21.496: ISDN Se0/0/0:23 **ERROR**: U7_ProgressReq: Sending PROGRESS in state 7 is not allowed. Dropping it *Sep 19 07:52:21.496: ISDN Se0/0/0:23 **ERROR**: Ux_BadMsg: Invalid Message forcall state 7, call id 0x46, call ref 0x9E88, event 0x89 *Sep 19 07:52:21.496: ISDN  **ERROR**: Module-l3_sdl_u  Function-Ux_BadMsg  Error-Source ID =  400  Event =  89 *Sep 19 07:52:31.140: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid type/plan 0x0 0x0 may be overriden; sw-type 3 *Sep 19 07:52:31.140: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0x3 is 0x2 0x1, Calling num 9 *Sep 19 07:52:31.140: ISDN Se0/0/0:23 Q931: Sending SETUP  callref = 0x0117 callID = 0x8098 switch = primary-5ess interface = User *Sep 19 07:52:31.140: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref = 0x0117         Bearer Capability i = 0x8090A2                 Standard = CCITT                 Transfer Capability = Speech                 Transfer Mode = Circuit                 Transfer Rate = 64 kbit/s         Channel ID i = 0xA98397                 Exclusive, Channel 23         Calling Party Number i = 0x21C3, '9'                 Plan:ISDN, Type:National         Called Party Number i = 0xA1, '498642949'                 Plan:ISDN, Type:National *Sep 19 07:52:31.260: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x8117         Cause i = 0x809C - Invalid number format (incomplete number) *Sep 19 07:52:31.264: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8  callref = 0x9E88         Cause i = 0x809C - Invalid number format (incomplete number) *Sep 19 07:52:31.360: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8  callref = 0x1E88 *Sep 19 07:52:31.360: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x9E88 Any help? Thanks ... View more

Hi, we have a Cisco IP Phone 7942 connected to our CCManager (system version 7.1.5.32900-2), that works fine, but when we connected the phone to the laptop it stops working. We have more phones connected to others laptops and they work fine, so we don´t know what can cause this. Any help? Thanks ... View more