Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone, I have a very strange behavior on a router with NAT from a VRF process in the global process. I have the structure and configuration of the router which is in the appendix. Part:There is a network A with the subnet 192.168.12.0 / 24 i...
Hello,
is the a way to acccess the ISE GUI via an iPAD Browser oder App. At the Moment the Browsers Safari, Mozilla and Chrome are "not supported".
Kind regards
Kai
Hello,I’m trying to setup following environment:WLC 5508 (OS 7.5)Up to 60 Access Points 1602ITwo SSID’s are requiredWPA/WPA2 Authentication is requiredMAC-Filter should also be usedI’ve done the following configuration:LAN Enviroment worksWLC Setup w...
Hello,we are using Extension Mobility on all our IP Phones (7962). This works perfectly. But now we want to try Singe Number Reach. I've read some Cisco Manuals and every one said, that I have to define a Phone Device device to Enable Mobilty - Prima...
When I press "Full Sync" at LDAP Directory all user including firstname, givenname, telephone number, will be added correctly to the "End users", but the telephone number is not added to the "Directory numbers".Has anybody an idea why?Kind regades...
Hello, what kind of route? Because the 192.168.12.0 /24 networks are connected to the router. The 10.0.100.0 /24 ,which contains the NAS, is also connected to router. I could start writing a host route, but how will it look like?ip route vrf VRF_A 10...
Can you share the output of show ip nat translation when trying to reach NAS device?Global ping testRouter#ping 10.0.100.5Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.0.100.5, timeout is 2 seconds:!!!!!Success rate is 100 percen...
Hello, Global routing tableRouter#show ip routeCodes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 - O...
