Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have a problem routing inbound Sip calls to correct extensions in this scenario:
- Cisco 2921 CME IOS vers.15.4(2)T, CME version 10.0
- Sip User agent registered to provider:sip-ua credentials username 5406031279 password 7 xxxxxxxxxxxxxxx...
Hi all,I'm facing this weird situation:Scenario:Cisco CME 8.8 (c2900-universalk9-mz.SPA.152-1.T4.bin) on 2901 platform, some Cisco 7945 and Cisco 6921 ip phone with sccp firmware onboard.All incoming and outgouing calls, are placed via a SIP trunk di...
Hi allI knew that since voice register dn is single line, is not allowed to make a full consult transfer call on Call manager express (9.0), but is there any work around to permit it?in fact is a heavy constrain if it wouldn't be possible at all.Any ...
Hi AllI have CME 8.8, about 55 ip phones (7942 and 7945), Paging is configured like that:ephone-dn 110number 899label 899.Interfonodescription INT.PER PAGINGname Interfonopaging ip 239.23.4.10 port 2000phones are confingured like that ephone 7 mac-...
Hi all,Having 2 cat 2960S in stack, do they support vlan routing and multicast routing?Thank you very much.Emanuele Sent from Cisco Technical Support iPhone App
Hi James,
this is debug ccsip messages you asked me for, calling number is +393484160884 and I've called +390292969196.
thanks a lot
Jan 19 15:34:45.121: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received: ...Jan 19 15:34:47.145: //-1/xxxxxxxxxxxx/...
Hi alla response to the question asked by myself should be that I'm hitting a phone firmware bug.As for Cisco bug toolkit:CSCtw61625workaround is to downgrade to 9.1(1)SR1 firmware version or lower, Cisco will release a firware version fixing the bug...
I did update and reboot,the first hours worked fine, then problem faced again.We have catalyst C2960 with lanlite image WS-C2960-48PST-S 12.2(50)SE5 C2960-LANLITEK9-M I suppose multicast is correctly supported.Other thing I could ...
