Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 3 c220c in Hyperflex mode. I want to eliminate the Fabric Interconnects...I just want to run the ova hyperflex installer on the 3 nodes... So I would end up managing the c220 through the cimc, the vms through vsphere... and the Hyperflex thro...
With Prefilter Fastpath, traffic bypasses inspection and is basically fastpathed out of the ftd device into what you may call a "toll bypass' hardware lane of some sort.With Prefilter Analyze the traffic does not bypass inspection....the question is ...
I have a customer who has an inbound ip inspect rule on the internet side of the router.....he also has an access-list on the LAN side coming into the router to prevent unauthorized people from getting to things.....there is an access-list on the int...
Why am I receiving this? IOS is 15.1 and CME 8.1.....the router works as long as I hand enter the commands.........but the old telephony-service setup won't work
Interesting one....my guess is it might have something to do with "order of processing".....where policy maps are last to looked at when a packet enters a routers interface...may want to try it without policy maps.....see below:3. Network Based Appl...
I may have answered this myself.......if the order of operations is inspect first and than access-lists......than the answer would be to inspect on the internet side outbound and allow back through acl inbound...and inspect on the lan side outbound a...
thanks. whats interesting though is we do see traffic going through the css with a source port below 1024 to a destination port lower than 1024. so it seems that it does actually pass traffic through with ports less than 1024.however maybe it decid...
