Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to get a new C8200L-1N-4T router brought into our existing SDWAN environment. We connected it to our 2960x switch using a Startech GLCTST optic. The 2960x shows the link as "connected' but the router is still showing "down down". I am ...
I am trying to configure a 9800 to automatically back up the configurations using SCP when someone issues the write-memory command. I have it successfully backing up to the root folder on the SCP server target, but I can't get it to put it into the s...
I have an unusual setup for SDWAN. I have 18 remote site that connect back to the main site. I am deploying 8200 and 4300 devices to the remote sites to replace the current routers. My main site is using 8300 routers to be the hub of the SDWAN enviro...
I am having issues getting both the enterprise and the management ports to be reachable on my DNA appliance. I put the default-gateway on the management and static routes on the enterprise and the enterprise is reachable but the management isn't. If ...
We are deploying 32 new IE1000s. I have deployed 5 using a temporary DHCP range on Vlan 1 through the main switch they connect to. Now that they have an IP address I can get into them locally, but I need to change the management IP and Vlan so they w...
Yes, the folder structure is in place, but nothing I do will put the file into the subfolder. The client though is Ok with leaving it in the root folder, so I am not going to have to resolve this. At this point I believe it probably is server permiss...
I opened a TAC case and they confirmed that VPN0 is the only way to get Edge routers to communicate with the vManage and the controllers. So now I am looking at getting a 2nd VPN0 interface connection to my core. Thanks for the help!
Currently our Internet terminates on the firewall, that connects to the core switch. The SDWAN routers will connect to the core routers and the remote sites are using a separate ISP connection to connect to the SDWAN router. It is set up currently li...
