From the Cisco IOS Software Checker (here), I found that our current ios software need to be upgrade to 12.1(22)EA15 In software.cisco.com (here) I found that the latest IOS version availble is 12.1(22)EA14 Does it mean that no solutions available f...
When I run the show service-policy I can find info about dropped connectios, but What is the cause of a "dropped connection" ?Server? LAN? LoadBalancer?What is understood for a "dropped connection"?Dropped connection is not the same tha a timeout see...
I had a simple scenario: 2 servers farms (each with two rservers) one for HTTP and another for FTP. Two VIPsEverything works fine, but when I try to access from one Rserver from the HTTP to the FTP-VIP nothing happendHow can I resolve the traffic bet...
We are trying to activate a link between a Cisco 2851 and a AS400 (iSeries)snasw cpname PRUEBA.SNASWsnasw port HPRLOOP hpr-ip Loopback0snasw pdlog informationsnasw dlctrace format analyzersnasw event dlcinterface Loopback0 ip address 192.168.104.31 2...
This morning the following messages has appear in my syslog:Sep 15 11:34:06.547: UPTIME:obfl_find_device_entry_by_duped_fd: Looking for fd '21', found cont_fd '0', path 'slot-1:'Sep 15 11:34:06.547: UPTIME:obfl_find_device_entry_by_duped_fd: Looking ...
Yes. That was the issue.I solve it by applying the concepts explained inhttp://2and2is5.wordpress.com/2010/10/04/when-to-use-source-nat-on-the-cisco-ace/THANKS Alot!!
