Solved: ACE4710 issue with NAT and traffic between RSERVERs

candrade · ‎07-10-2013

I had a simple scenario: 2 servers farms (each with two rservers) one for HTTP and another for FTP. Two VIPs

Everything works fine, but when I try to access from one Rserver from the HTTP to the FTP-VIP nothing happend

How can I resolve the traffic between two RSERVER via the VIP?

gaursin2 · ‎07-10-2013

Hi

You need to add some more detail of your toplogy. but what i assuming is that all four servers [HTTP and FTP] are in same subnet, thats why when HTTP rserver hit FTP VIP reply from FTP will hit directly. If this is the case, you have to configured NAT on this server side VLAN interface.

View solution in original post

gaursin2 · ‎07-10-2013

Hi

You need to add some more detail of your toplogy. but what i assuming is that all four servers [HTTP and FTP] are in same subnet, thats why when HTTP rserver hit FTP VIP reply from FTP will hit directly. If this is the case, you have to configured NAT on this server side VLAN interface.

candrade · ‎07-12-2013

Yes. That was the issue.

I solve it by applying the concepts explained in

http://2and2is5.wordpress.com/2010/10/04/when-to-use-source-nat-on-the-cisco-ace/

THANKS Alot!!