Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We have setup a 3 Lightweight AP using WLC 2500. We've created a Guest SSID with local web authentication. Session Timeout was disabled and User Idle Timeout is set to 86400 (24 hrs). Our main problem is that, Apple devices such as MAC book, Ipa...
Hi, We have added a GSM Gateway in a CUCM device that will be used to call mobile devices. Our problem is that when we try calling a mobile number and cancel the call, there will be a 6 seconds delay before the call will be terminated. We check the G...
Hello guys,Please help me on my configuration. this my first time configuring cme on 2911 router. I followed all the instruction on cisco guide but when i type show voice port summary, the IN status and OUT status turns to none. below are my configu...
Hi, Seeking again for your advice. The ISP verified that the pilot number assign in our ISDN is not yet working so i assign the given number blocks as my secondary number in each ip phone and then i tried calling it using different trunk line and...
Hi,thanks for your continuous response in my query. i'll do all your suggestions in my config. i'll also call the service provider to check if their isdn is working properly. i will update again as soon as possible. thanks again.
Hi,This is the result that i obtain from debugging.outgoing call, local number 110:Jul 29 10:51:20.825: //50/A2D1C13F8093/CCAPI/cc_api_display_ie_subfields: ccCallSetupRequest: cisco-username= ----- ccCallInfo IE subfields ----- cisco-ani=119...
