Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a 1232 AP (12.3(8)JA2) that is giving us problems when we try to create a mac address access list throug the browser interface. Although we use the browser interface to create and maintain the list, we twice now have gotten an error indic...
We're getting an error when we try to use the GUI to add and remove MAC addresses from a our ACL for filtering purposes. Cisco's doc says that we need to delete or clear the existing ACL using the CLI in order for us to get rid of the error message ...
We're having trouble getting our Z-Com radios connecting to 1232 APs. For the AP, we only have the "B" radio enabled, with everything set to defaults except the SSID and channel.Z-Com cards are being used in Affirmative thin clients and when we switc...
Now that the PCM352 has been end of lifed, to go from a PCM352 series client card to the one of the new CB21AG client cards, will we have to un-install the 352 driver software then install the CB21 card software?Thanks
Hi,We are in the planning stages of a in-building wireless implematation for a medium-sized educational campus. For wireless client access (primarily notebooks, maybe some desktops) we were thinking of recommending an 802.11g infrastructure using Cis...
Few things to try or look at:Make sure that antennas are on the B radio connectors not the the A connectorsAdjacent cells should be on the non overlapping FQs---either 1, 6, or 11If diversity is on (default)then two antennas need to be used and anten...
Hey Bruce,Hope all is well with you--it's been a while since we last spoke. Real easy one for you:Can we send Voice packets through a pair of your BR342 bridges?This distance is short (13.5 Yagi to 13.5 Yagi)The link is strong 0 to 2% retriesThe num...
